STEEL GUARD
PRODUCT CODE – AB501SG
Steel Guard is a two component epoxy composite paste interfused with a proprietary combination of tightly packed samot and glass-ceramic, which can be applied by trowel and hand.
It cures exothermically over time with a low peak temperature to form a high frictional and corrosive wear durable barrier on steel surfaces, with a low friction coefficient.
Its unique basic resin system and wear resistant particle interfusion are covered by two patents.
Ideal for wear and corrosion control on:
- Pulleys
- Chutes
- Fans
- Fan Casings
- Pump Casings
- Tanks
- Screens
- Cyclones
GLASS SHIELD
PRODUCT CODE – AB502GS
Glass Shield is a two component epoxy composite paste interfused with a proprietary combination of high density, high corrosive resistant glass-ceramic beads. It can be applied by trowel and hand .
It cures exothermically over time with a low peak temperature to form a high frictional and especially high corrosive wear durable barrier on steel surfaces, with a low friction coefficient.
The unique basic resin system and world first glass-ceramic interfusion are covered by two patents.
Two part epoxy resin system for wear and corrosion protection on:
- Chemical solution tanks
- Septic tanks
- Flotation tanks
- Flotation blades
- Pipe Bends
CRUSHER BACK
PRODUCT CODE – AB503CB
Crusher Back is a two component epoxy composite pour able mixture designed for use in crushers and mills.
It is especially suited for applications where a thick layer of backing is employed as its low peak exotherm, slight flexibility and high fibre content leads to a product which does not crack easily during and after curing, even where there is a wide temperature range of the equipment in use.
Its unique basic resin system is covered by a patent.
Two part epoxy resin Crusher Backing for:
- Primary crushers
- Secondary crushers
- Tertiary crushers
- Mill liners
- Gyratory crushers
- Cone crushers
UNIVERSAL GROUT
PRODUCT CODE – AB504UG
Universal Grout is a three component pour able epoxy composite mixture.
It is a high end quality product with very high pull and compression strength. It has a low peak exotherm and long working time. The supply of a three component combination gives the product a very long shelf life.
The unique basic resin system is covered by a patent.
Three part epoxy resin system for:
- Anchoring bolts
- Setting machines
- Setting pumps
- Anchoring civil structures
PIPE SHIELD
PRODUCT CODE – AB505PS
Pipe Shield is a two component pour able epoxy composite designed for spin application inside pipes carrying slurries and corrosive liquids.
It has a low peak exotherm and is slightly flexible, making cracking under curing, temperature changes or physical handeling less than old technology epoxies. It cures exothermically to form a high frictional and especially low corrosive wear durable barrier on steel surfaces, with a low friction coefficient.
The unique basic resin system and world first glass-ceramic interfusion, are covered by two patents.
Suitable for use in all steel pipes exposed or subjected to abrasive and corrosive wear, with internal diameters ranging from minimum Ø150mm up to Ø1000mm, like:
- Slurry pipe lines
- Potable water pipes
- Chemical solution pipes
EPOXY PAINT
PRODUCT CODE – AB506EP
Epoxy Paintis a two component epoxy, thick paint, formulated to maximise chemical resistance. It can be applied by roller, brush and/or squeegee, followed by roller
It cures exothermically over time with a low peak temperature to form a high frictional and especially high corrosive wear durable barrier, on steel, concrete and wood surfaces. It bonds directly without a primer. It is available in five colours, Charcoal, Grey, Maroon, Green, Cream, and has a satin finish. It can be finished with a clear coat if required.
The unique basic resin system is covered by a patent.
Two part epoxy resin system for wear and corrosion protection on:
- Components
- Pipes
- Floors
- Tanks
- Vessels
- Cyclones
- Pumps
- Machines
QUICK BOND
PRODUCT CODE – AB507QB
Quick Bond is a two component epoxy composite paste like glue, often used to bond ceramics and metals.
It cures exothermically over time with a low peak temperature to form a high strength bond between a variety of surfaces. It can be easily applied and left to cure without heat or uv. It is available in two colours, maroon and beige.
The unique basic resin system is covered by a patent.
Two part epoxy resin system for bonding:
- Gator teeth
- Ceramic tiles
- Ceramic to metal
- Metal to metal
- Some polymers
FLOOR GROUT
PRODUCT CODE – AB508FG
Floor Grout is a two component epoxy composite thick liquid interfused with a proprietary combination of high density, high corrosive resistant silica. It can be applied by squeegee followed by roller, and is mostly self levelling. It is specifically used to fill in chemically corroded concrete and gap filling in construction.
It cures exothermically over time with a low peak temperature to form a high frictional and especially high corrosive wear durable barrier on cement.
The unique basic resin system is covered by a patent.
Two part epoxy resin system for filling and corrosion protection on:
- Concrete floors
CHEMLINE
PRODUCT CODE – AB509CL
Chemline is a two component epoxy crassis. It can be applied by trowel and hand in areas where high chemical integrity of chemical solutions are critical. Leaching less than the parts per billion range is possible with this product.
It cures slowly and exothermically over time with a low peak temperature to form an especially high corrosive wear durable barrier on steel and cement surfaces, with a very low friction coefficient. It can flex slightly to be able to stretch with temperature fluctuations in a steel matrix.
The unique basic resin system and crassis interfusion are covered by two patents.
Two part epoxy resin system for wear and high corrosion protection on:
- Lining chemical solution tanks
- Gulley’s and channels
- Flotation tanks
- Flotation blades
- Flotation components
GENERAL MARINE
PRODUCT CODE – AB510GM
General Marineis a two component epoxy medium viscosity liquid. It is a general boat building epoxy with fast or slow hardeners.
It cures exothermically over time with a low peak temperature to form a hard polymer that can be sanded.
The unique basic resin system is covered by a patent.
Two part epoxy resin system for boat building on:
- Wood
- Metals
- Wood and metal combinations
- Some polymers
INFUSION MARINE
PRODUCT CODE – AB511IN
Infusion Marineis a two component epoxy composite, low viscosity liquid used in boat building and other vacuum infusion projects. It can be vacuum infused in small and large panels.
It cures exothermically over time with a low peak temperature.
The unique basic resin system is covered by a patent.
Two part epoxy resin system for infusion into:
- Polymer fibres